The box!

I call it the box!

Still at the thrift store. 

It was a solid box.  The hardware was really heavy, and in good shape!  I sent a picture message to my husband, he was a little bit skeptical....

I deglossed!

I prinmed!

I sanded and added stain to the bare places I sanded. 

I love the finished project!



Drop Cloth Curtains

My newest project!  I really like how they turned out!

I started with a really big empty window.  My ceilings are really high so I needed my drapes to be a least 96 inches long.  I don't know how many of you have priced curtains that have that kind of length, but this was looking like a really expensive undertaking!

The window is a big 93 inches wide and I wanted them to hang all the way to the floor.  I really hated the lines in the three separate blinds!  Sooo I did what I always do and started looking on Pinterest for ideas.  I found several different "drop cloth curtains"  Well if it's one thing we have around here, its drop cloths.  I tried to imagine what they would look like.  Certainly they would be big and cheap.  I got mine at Home Depot on the advise that they have the "best".  I read to be careful and make sure you get them all the same color.  I also heard horror stories about the one's at Lowes having seams right down the middle.  I was lucky and mine were all perfect!  They are already hemmed on top and bottom, so no sewing! Yay! 

These are the ones I got!  $10.00 bucks each!  Can't beat that!  I washed them all to get the drop cloth smell.  Surprisingly the take on a much softer feel after thay have been washed.  They did wrinkle though.  Luckily though I have a six foot marble bar that worked great for ironing them. (Also, thankfully a husband that does not mind ironing!)

After all that ironing we were trying to figure out how far apart to put the clip rings I bought.  I got 5 packages.  I was thinking one for each panel, and 1 in case I had no idea? 

I put one clip on each end and the one right in the center.  It kind of worked out about one per 8 inches.  I was one clip short! dang!  So I just sort of stretched one panel a little further. I all worked out ok..

See how nice and smooth they ironed out!  Next my husband installed my really long curtain rod.  We decided to just let the extra length pool at the bottom.  I saw some that were turned over at the top, but I didnt like that look too much. You could do it either way. 

Next I am going to hang these on my back deck!



Two Toned Buffet

Finally finished the buffet!

I had so much fun with this project!  Absolutely No sanding!  I used a deglosser and it worked beautifully! 

After the deglosser, I primed and then painted.  I used Valspar paint in two complementary colors and finished with a coat of Polycrylic!  I loved this project!  I usually distress and rough up the corners, but I decided to mix it up and use a clean finish.
The hardware was shiny gold.  I used a bronze rub and buff and completely changed the looks!  I have this piece in my dining room along with my newly refinished table and chairs. The different finishes look so awesome together.  I will post dining room pics some. 

Christmas Trees!

Do you love them?  I really like the way they turned out, but let me warn you, this is a time consuming project!

I saw some trees on Pinterest and decided to give it a try.... They had used paper plates for the cones.  I didn't have any paper plates, so I improvised and used some scrapbook paper.  Card stock would have probably been better, but I was anxious to get started.  So I made my cones in three different sizes using regular tape to form. 

I started with the green tree.  It was by far the hardest!  It took quite a long time.  Here is what you need.

I cut the green paper into strips about 1 and 1/2 inches wide.  Then I went ahead and twisted a whole bunch.  Many more than pictured here. I used a glue stick to form the little rosettes.  I used the length of the tissue paper for about half and cut some in half to make smaller rosettes. 

To make the rosettes, just twist the twisted paper in a circle.  To keep your form from showing, glue them very close together.  I used a hot glue gun for this, but BE CAREFUL!  Tissue paper is very thin.  I suffered some pretty good burns on this project!

On to the red one.  Again cut your tissue paper in strips 1and1/2 inches wide.

Twist them just like the green ones.  Then start wrapping them around, hot glue as you

go.  I didn't go in one continuous strip, I cut them on the back so my rows would be lever. 

After you get those done, and it may be awhile!  On to the silver.  this one went much faster! 

Here are the things you need....

Start by cutting the same 1 and 1/2 inch strips.  The cut them in squares.  It will take alot.  I think I used a whole pack of silver paper.  When you get your squares cut, fold the over and then again.  Now take the corner and pinch them. 

Now start gluing!  Be careful!  I still don't have some fingerprints! 

Keep going til its completely covered.  I want to display mine on candle sticks!  I am headed to the dollar store to get some now!  Have fun!



Craigslist Makeover Dresser and Chest

Its all coming together!  I have used all the same techniques as with the bed and nightstand, so I won't bore you with the details.  I am just going to post a few pics and tips.

You remember before?  Shiny and brass handles???  It now looks so rich and warm.  Nothing like the 1970's look of before. 

I had quite the assembly line going!  Remember, the only thing I had to sand were the tops.  Everything else I simply used a de-glosser and primed. 

Love  <3

another view...



$7.00 Make-over

I love my bamboo barstools, but the seats were looking a little worn. 

I went to Hobby Lobby and purchased a remnant upolstery fabric for $7.00 a yard. 

It only took one yard to recover these stools. 

This is a picture of the "tired stools"

I took the seats off the stools, laid the fabric out flat so the pattern of the new houndstooth would be straight and pulled it tight and stapled with a staple gun.  Because the original fabic was not torn or stained, I left it on.  No need for backing! 

I didnt take pictures of all the stapling, but it was pretty easy.  Just started at the beginnng and worked my way to the back.  I did pick a fabric that was easy to work with.  I think stripes or too much pattern, would be a little harder to keep straight. 

yay! finished product!

Craigslist Makeover part 2 Nightstands

Love the way the night stands turned out!  Yay!  These are also part of the Craigslist redo.  We started by using the deglosser to avoid a lot of sanding.  We did sand the tops down pretty much all the way using the black and decker mouse.  Eveything else just got a couple of coats of deglosser. 



We cleaned it up with some mineral spirits to get rid of any residue.  Then we painted the top with PolyShades by Minwax.  The color was antique walnut. 

You have to work fast and keep the edges wet.  I think when we do the larger pieces we are not going to use the same product.  It is great for small surfaces, but we are afraid it might dry to fast and be difficult to work with.  I guess we will see.  After one coat, we let it dry overnight.  Lightly sanded and applied a second coat. 

Now its time for primer.  I used two coats on the first one, but when I started distressing, the paint was so thick, I decided to use only one coat of primer on the second nightstand.  They both turned out beautiful.....

Next comes the black paint.... I love Sherwin Williams latex enamel.  Goes on really smooth!  Get a good brush!

Next the fun part! The distressing!  We used the sander.  Do the edges first and then add more if you like.  You cant do it wrong.  I like to use stain and a sponge to go back over the bare wood.  Really easy and looks so good. 

The hardware that was on the furniture was in really good shape, however it was gold.  I liked the look but not the color. I happened to think about some Rub N Buff I had bought for some picture frames.  It comes in a lot of different colors.  I got it at Hobby Lobby.  The color is copper. 

You just take the Rub and Buff and rub it on with your finger.  I just rubbed over the shiny gold areas.  I took the picture backwards..... the finished ones are on the left.  When they dry, your just shine them up with a clean cloth.  This saved us tons of money.  There are about thirty!  If we had to replace them all it would have added up quick!..These look great and the copper color matches the wood perfectly.

Its all coming together! Stay tuned!